Hardware options installation 86
7.
Install the TPM board. Press down on the connector to seat the board ("
System board components
" on
page
12
).
8.
Install the TPM security rivet by pressing the rivet firmly into the system board.
9.
Install the PCI riser cage (on page
24
).
10.
Install the access panel (on page
22
).
11.
Install the server into the rack ("
Installing the server into the rack
" on page
30
).
12.
Power up the server (on page
17
).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker setup, and can be saved and printed after
BitLocker is enabled. When using BitLocker, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker detects a possible compromise of system
integrity.
Содержание ProLiant DL160 Gen9
