assigns 192.168.40.1 as the IP address of the default gateway for the print server.
NOTE
If the HP Jetdirect print server is configured by DHCP and you manually
change the subnet mask or the default gateway address, you should manually
change the print server's IP address. This will release the DHCP-assigned
address back to the DHCP IP address pool.
Config Server
(Read-only parameter) The IP address of the server (such as a BOOTP or DHCP server)
that last configured the IP address on the HP Jetdirect print server.
TFTP Server
(Read-only parameter) The IP address of the TFTP server that provided TFTP parameters
to the HP Jetdirect print server.
TFTP Filename
(Read-only parameter) The path and TFTP filename on the TFTP server. For example,
hpnp/printer1.cfg
domain-name
The domain name for the device. For example,
domain-name support.hp.com
assigns
support.hp.com
as the domain name.
The domain name does not include the host name; it is not the Fully Qualified Domain
Name (such as printer1.support.hp.com).
pri-dns-svr
IP address of the primary DNS (Domain Name System) server.
sec-dns-svr
IP address of a secondary DNS server to use if the primary DNS server is unavailable.
pri-wins-svr
The IP address of the primary Windows Internet Naming Service (WINS) server, in dotted
notation.
sec-wins-svr
The IP address of the secondary Windows Internet Naming Service (WINS) server, in
dotted notation.
TCP/IP Print Options
9100-printing
Enables or disables printing to TCP port 9100 on the print server.
0
disables,
1
(default)
enables.
ftp-printing
Enables or disables the ability to print through FTP.
0
disables,
1
(default) enables. (TCP
ports 20, 21)
ipp-printing
Enables or disables the ability to print using IPP.
0
disables,
1
(default) enables. (TCP port
631)
lpd-printing
Enables or disables the ability to print using LPD.
0
disables,
1
(default) enables.(TCP port
515)
banner
Enables or disables printing an LPD banner page.
0
disables banner pages.
1
(default)
enables banner pages.
ipp-job-acct
Enable or disable job accounting for IPP printing.
0
disables,
1
(default) enables.
interlock
Specifies whether an acknowledgement (ACK) on all TCP packets is required before the
printer is allowed to close a Port 9100 print connection. A Port Number and Option value
are specified. For HP embedded print servers, the default Port Number is 1. Option value
0
(default) disables interlock,
1
enables. For example,
“interlock 1 1”
specifies port 1, interlock enabled.
mult-tcp-conn
(Restrict Multiple Ports) Enables or disables multiple TCP connections. Allows you to
restrict the use of multiple ports.
0
(default): allows multiple connections.
Table 3-3
Telnet Commands and Parameters (continued)
ENWW
IPv4 Configuration
45
Содержание Jetdirect J7974E
