4.
In the
Add New Scope
Wizard, click
Next
.
5.
Enter a Name and Description for this scope, then click
Next
.
6.
Enter the range of IP addresses for this scope (beginning IP address and ending IP address). Also,
enter the subnet mask. then click
Next
.
NOTE
If subnetting is used, the subnet maskdefines which portion of an IP address
specifies the subnet and which portion specifies the client device.
7.
If applicable, enter the range of IP addresses within the scope to be excluded by the server. Then
click
Next
.
8.
Set the IP address lease duration for your DHCP clients. Then click
Next
.
HP recommends that all printers be assigned reserved IP addresses. This can be accomplished
after you set up the scope (see step 11).
9.
Select
No
to configure DHCP options for this scope later. Then click
Next
.
To configure DHCP options now, select
Yes
and click
Next
.
a.
If desired, specify the IP address of the router (or default gateway) to be used by clients. Then
click
Next
.
b.
If desired, specify the Domain Name and DNS (Domain Name System) servers for clients.
Click
Next
.
c.
If desired, specify WINS server names and IP addresses. Click
Next
.
d.
Select
Yes
to activate the DHCP options now, and click
Next
.
10.
You have successfully set up the DHCP scope on this server. Click
Finish
to close the wizard.
11.
Configure your printer with a reserved IP address within the DHCP scope:
a.
In the DHCP tree, open the folder for your scope and select
Reservations
.
b.
Click the
Action
menu and select
New Reservation
.
c.
Enter the appropriate information in each field, including the reserved IP address for your
printer. (Note: the MAC address for your HP Jetdirect-connected printer is available on the
HP Jetdirect configuration page.)
d.
Under “Supported types”, select
DHCP only
, then click
Add
. (Note: Selecting
Both
or
BOOTP
only
will result in a configuration through BOOTP due to the sequence in which HP Jetdirect
print servers initiate configuration protocol requests.)
e.
Specify another reserved client, or click
Close
. The reserved clients added will be displayed
in the Reservations folder for this scope.
12.
Close the DHCP manager utility.
To Discontinue DHCP Configuration
CAUTION
Changes to an IP address on your HP Jetdirect print server may require updates to
printer or system printing configurations for clients or servers.
ENWW
IPv4 Configuration
37
Содержание Jetdirect J7974E
