In addition, this page allows you to run the
HP Jetdirect Security Configuration Wizard
to configure
or change the current security level. This wizard will guide you through the print server's security
configuration settings for your network. Click
Start Wizard
to run the wizard. This opens the
Security
Level
page.
The optional configuration parameters presented by the wizard will depend on your choice of security
level. For an overview, see
Table 4-14 Wizard Security Levels
.
NOTE
If you improperly exit the wizard (for example, by failing to use the Cancel button), an
Operation Failed
screen may appear. If so, wait approximately two minutes before entering the
wizard again.
Table 4-14
Wizard Security Levels
Security Level
Description
Basic Security
This option requires that you configure an administrator password for configuration
management. The administrator password is shared with other management tools, such
as Telnet and SNMP applications. However, some management tools, such as Telnet, use
plain-text communications and are not secure.
The
Administrator Account
page is used to enter the administrator password. The
Administrator Password will also be used as the SNMP v1/v2 Set Community Name for
SNMP management applications.
NOTE
To clear the Administrator Password, apply blank entries using
Custom
Security
, or refer to the
Admin. Account
page below.
The
Configuration Review
page displays all the current settings that may affect security.
Click
Finish
to set your basic security selections.
Enhanced Security
(Recommended)
(Full-featured print servers only) This option adds to Basic Security by automatically
disabling management protocols that are do not use secure, encrypted communications
(such as Telnet and FTP firmware updates, RCFG, SNMP v1/v2c). To change individual
protocol settings, see
Mgmt. Protocols
.
The
Administrator Account
page is used to enter the administrator password.
NOTE
To clear the Administrator Password, apply blank entries using
Custom
Security
, or refer to the
Admin. Account
page below.
SNMP Configuration
pages are used to configure specific SNMP settings:
●
Enable SNMPv3: (Full-featured print servers only) Enable SNMP v3 and create an
SNMP v3 account. Creating an SNMP v3 account is not recommended if you manage
devices using HP Web Jetadmin. See
SNMP
.
●
Enable SNMPv1/v2 read-only access: Enable this option to allow support of current
tools that rely on SNMP v1/v2 for device discovery and status.
The
Configuration Review
page displays all the current settings that may affect security.
Click
Finish
to set your basic security selections.
Custom Security
This option allows you to manually set all available security settings supported by your
print server. For more information on specific parameters and selections, see the
information for the
Mgmt. Protocols
and
Authorization
menu pages.
The
Administrator Account
page is used to enter the administrator password.
82
Chapter 4 HP Jetdirect Embedded Web Server (V.34.xx)
ENWW
Содержание Jetdirect J7974E
