Menu Item
Submenu Options
Additional Options
Description of settings
EMBEDDED TESTS
Embedded tests help to identify whether a network fault
is internal or external to the printer/MFP. Use an
embedded test to check hardware and communication
paths on the print server. After you select and enable a
test and set the execution time, you must select
EXECUTE to initiate the test.
Depending on the execution time, a selected test will run
continuously until either the printer is turned off, or an
error occurs and a diagnostic page is printed.
LAN HW TEST
CAUTION
This embedded test will erase
your TCP/IP configuration.
This test performs an internal loopback test. An internal
loopback test will send and receive packets only on the
internal network hardware. There are no external
transmissions on your network.
Select
YES
to choose this test, or
No
to not choose it.
HTTP TEST
This test checks operation of HTTP by retrieving
predefined pages from the printer/MFP device, and tests
the embedded Web server.
Select
YES
to choose this test, or
No
to not choose it.
SNMP TEST
This test checks operation of SNMP communications by
accessing predefined SNMP objects on the printer/MFP
device.
Select
YES
to choose this test, or
No
to not choose it.
DATA PATH TEST
This test helps to identify data path and corruption
problems on a PostScript printer/MFP device. It sends a
predefined PostScript file to the printer/MFP device,
However, the test is paperless; the file will not print.
Select
YES
to choose this test, or
No
to not choose it.
SELECT ALL TESTS Use this item to select all available embedded tests.
Select
YES
to choose all tests. Select
No
to not run all
tests.
EXECUTION TIME
[H]
Use this item to specify the length of time (in hours) that
an embedded test will be run. You may select a value
from 1 to 60 hours. If you select zero (0), the test will run
indefinitely until an error occurs or power is turned off.
Data gathered from the HTTP, SNMP, and Data Path
tests will be printed after the tests have completed,
EXECUTE
Choose one of the following:
YES: Initiate the selected test.
NO: Do not initiate the selected test.
PING TEST
DEST TYPE
DEST IP
PACKET SIZE
This test is used to check network communications. This
test sends link-level packets to a remote network host,
Table C-1
HP Jetdirect Control Panel Menu (continued)
162
Appendix C The HP Jetdirect Control Panel Menu (V.34.xx)
ENWW
Содержание Jetdirect J7974E
