![background image](http://html.mh-extra.com/html/hp/jetdirect-j7974e/jetdirect-j7974e_administrators-manual_163704120.webp)
Resetting to Factory Defaults
Parameters on the HP Jetdirect print server (for example, the IP address) can be reset to factory default
values using the following procedures:
CAUTION
A Jetdirect X.509v3 certificate will be saved over a cold reset to factory default
values. However, a Certificate Authority (CA) certificate installed to validate a network
authentication server will not be saved.
●
HP LaserJet Printer with Embedded Jetdirect Print Server
In most cases, the HP Jetdirect print server can be reset to factory defaults when a cold-reset is
performed on the printer.
CAUTION
Be sure to print a Jetdirect configuration page before performing a cold reset.
Resetting the printer will clear all data from the printer memory and reset all printer settings,
including network configurations, to their factory default values. After a cold reset, users may
be affected due to changes in user-specified printer settings. Network systems may lose
their connection to the printer.
NOTE
The
Restore Factory Settings
menu item in the printer control panel menu will not
reset the HP Jetdirect print server.
❑
For recent LaserJet printers and MFPs, use the printer's Service menu accessed during the
initial power-on sequence. See
Example: Cold Reset Using the Service Menu
.
❑
For other printers, refer to your printer service manuals.
NOTE
After a cold reset, print a Jetdirect configuration page to confirm that factory-reset
values have been assigned.
Example: Cold Reset Using the Service Menu
To perform a cold reset on many recent HP LaserJet printers and MFPs:
1.
Turn the printer on and watch for the memory count to begin.
2.
Press and hold the
Select
button (or the “6” button on MFPs with numeric keypads only) until
the three control panel lights (
Ready
,
Data
,
Attention
) blink and then remain on.
3.
Release the
Select
button (or “6” button). The control panel will display
Select Language
.
4.
Press the down arrow
M
button (or “9” button) until
Cold Reset
appears.
5.
Press the
Select
button (or “6” button) to perform a cold reset and then continue its power-on
sequence.
110
Chapter 7 Troubleshooting the HP Jetdirect Print Server
ENWW
Содержание Jetdirect J7974E
