syslog-svr
The syslog server's IP address in dotted notation. It specifies the server that the HP
Jetdirect print server sends syslog messages to. For example,
syslog-svr: 192.168.40.1
assigns 192.168.40.1 as the IP address of that server.
syslog-max
Specifies the maximum number of syslog messages that can be sent by the HP Jetdirect
print server on a per-minute basis. This setting allows administrators to control the log file
size. The default is 10 per minute. If it's set to zero, the number of syslog messages is not
restricted.
syslog-priority
Controls the filtering of syslog messages sent to the syslog server. The filter range is
0
to
8
, with
0
being the most specific and
8
the most general. Only messages that are lower
than the filter level specified (or higher in priority) are reported. The default setting is
8
,
where messages of all priorities are sent.
If
0
, all syslog messages are disabled.
syslog-facility
A code used to identify the source facility of a message (for example, to identify the source
of selected messages during troubleshooting). By default, the HP Jetdirect print server
uses
LPR
as the source facility code, but local user values of
local0
through
local7
can
be used to isolate individual or groups of print servers.
slp-config
Enables or disables the Service Location Protocol (SLP) operation on the print server:
0
disables,
1
(default) enables. SLP is used by selected HP software applications (through
UDP port 427) to automate device discovery.
If SLP will use multicast protocols, Multicast IPv4 must be enabled.
slp-keep-alive
Specifies a time period for the print server to send multicast packets on the network to
prevent being deleted from network device tables. Some infrastructure devices, such as
switches, may delete active devices from their device tables due to inactivity on the
network. To enable this feature, set a value from 1 to 1440 minutes. Set 0 to disable this
feature.
mdns-config
Enables or disables Bonjour (formerly listed as Multicast Domain Name System, or mDNS)
services.
0
disables,
1
(default) enables. Bonjour is typically used for IP address and name
resolution (through UDP port 5353) where a conventional DNS server is not available.
For Bonjour operation, Multicast IPv4 must be enabled.
mdns-service-name
Specifies an alphanumeric string of up to 64 ASCII characters assigned to this device or
service. This name is persistent and is used to resolve a particular device or service if
socket information (such as the IP address) changes from session to session. Apple
Bonjour will display this service. The default service name is the printer model and the LAN
Hardware (MAC) address.
mDNS Domain Name
(Read-only parameter) Specifies the Bonjour (mDNS) domain name assigned to the
device, in the form <host name>.local. If a user-specified host name has not been
assigned, the default host name NPIxxxxxx is used, where xxxxxx are the last 6 digits of
the LAN hardware (MAC) address.
mdns-pri-svc
Specifies the Bonjour (mDNS) highest priority service to use for printing.To set this
parameter, choose one of the following printing option numbers:
1
: Port 9100 printing
2
: IPP port printing
Table 3-3
Telnet Commands and Parameters (continued)
ENWW
IPv4 Configuration
47
Содержание Jetdirect J7974E
