IBM 88631SU - System x3850 - 8863 Installation Manual Download

Page: 1 / 90

Welcome.

Thank you for buying an
IBM System x server.

This server
contains information for setting
up and configuring your server.

For detailed information about
your server, view the publications
on the

You can also find the most
current information about your
server on the IBM Web site at:
http://www.ibm.com/support

Your server

is based on the X-Architecture
technology, and it features
superior performance, availability,
and scalability.

Documentation CD.

Installation Guide

Go to the Server Support

flowchart

Cable the server

and options

Start the server

Install options:

Drives
Microprocessors
Adapters
Memory

Did the server

start correctly?

Yes

Use ServerGuide

to set up and

configure hardware

Did configuration

complete?

Use

ServerGuide to

install operating

system?

Install applications,
such as IBM systems
management software
and IBM ServeRAID
programs

System is ready to use.

Go to the Server Support

flowchart to register

and profile your server.

Go to the Web for instructions,

http://www.ibm.com/support

Yes

Installation Guide

Type 8863

System x3850

Summary of Contents for 88631SU - System x3850 - 8863



























































































Search results

Summary of Contents for 88631SU - System x3850 - 8863

Reviews:

Related manuals for 88631SU - System x3850 - 8863

Brands by name

Popular brands

IBM 88631SU - System x3850 - 8863, Installation Manual

Search results

Summary of Contents for 88631SU - System x3850 - 8863

Reviews:

Related manuals for 88631SU - System x3850 - 8863

Brands by name

Popular brands