![background image](http://html.mh-extra.com/html/hp/jetdirect-j7974e/jetdirect-j7974e_administrators-manual_163704173.webp)
Menu Item
Submenu Options
Additional Options
Description of settings
TIMEOUT
COUNT
PRINT RESULTS
EXECUTE
then waits for an appropriate response. To run a ping
test, set the following items:
●
DEST TYPE: Specify whether the target device is
an IPv4 or IPv6 node.
●
DEST IP: Specify the IP address (IPv4 or IPv6,
depending on the DEST TYPE value specified) of
the remote host. A valid IP address must be
entered. For example, 0.0.0.0 is not a valid IPv4
address and is not allowed.
●
PACKET SIZE: Specify the size of each packet, in
bytes, to be sent to the remote host. The minimum
is 64 (default) and the maximum is 2048.
●
TIMEOUT: Specify the length of time, in seconds,
to wait for a response from the remote host. The
default is 1 and the maximum is 100.
●
COUNT: Specify the number of ping test packets to
send for this test. Select a value from 1 to 100. To
configure the test to run continuously, select 0.
●
PRINT RESULTS: If the ping test was not set for
continuous operation, you can choose to print the
test results. Select YES to print results. If you select
NO (default), results will not be printed.
●
EXECUTE: Specify whether to initiate the ping test.
Selet YES to initiate the test, or NO to not run the
test.
PING RESULTS
PACKETS SENT
PACKETS
RECEIVED
PERCENT LOST
RTT MIN
RTT MAX
RTT AVERAGE
PING IN
PROGRESS
REFRESH
Use this item to view the ping test status and results
using the control panel display. You can select the
following items:
●
PACKETS SENT: Displays the number of packets
(0 - 65535) sent to the remote host since the most
recent test was initiated or completed.
●
PACKETS RECEIVED: Displays the number of
packets (0 - 65535) received from the remote host
since the most recent test was initiated or
completed.
●
PERCENT LOST: Displays the percent of ping test
packets that were sent with no response from the
remote host since the most recent test was initiated
or completed.
●
RTT MIN: Displays the minimum detected round-
trip-time (RTT), from 0 to 4096 milliseconds, for
packet transmission and response.
●
RTT MAX: Displays the maximum detected round-
trip-time (RTT), from 0 to 4096 milliseconds, for
packet transmission and response.
●
RTT AVE: Displays the average round-trip-time
(RTT), from 0 to 4096 milliseconds, for packet
transmission and response.
Table C-1
HP Jetdirect Control Panel Menu (continued)
ENWW
Parameter Descriptions
163
Содержание Jetdirect J7974E
