![background image](http://html.mh-extra.com/html/hp/jetdirect-j7974e/jetdirect-j7974e_administrators-manual_163704165.webp)
If the connection is successful, a Ready message will be displayed.
After a successful connection, the user is prompted for a login name and password. The default is the
client's login name. The Jetdirect FTP server will allow any user name. Passwords are ignored.
If login is successful, a message “230” will be displayed on the client system. In addition, the available
HP Jetdirect ports for printing will be displayed. HP Jetdirect print servers supported in this guide provide
a single port (Port 1). For a typical FTP printing session, see “
Example of an FTP Session
.”
Ending the FTP Session
To end an FTP session, type
quit
or
bye
.
NOTE
Prior to ending an FTP session, a
Ctrl C
command is recommended to ensure the
data connection is closed.
Commands
The following table summarizes commands available to the user during an FTP printing session.
Table B-1
User Commands for HP Jetdirect FTP Server
Command
Description
user <username>
<username>
specifies a user. Any user will be accepted and can print to the selected
port.
cd <port#>
<port#>
selects a port number for printing. For supported HP Jetdirect embedded print
servers, only
port1
is available.
cd /
/
specifies the root directory of the HP Jetdirect FTP server.
quit
quit
or
bye
terminates the FTP session with the HP Jetdirect print server.
bye
dir
dir
or
ls
displays the contents of the current directory. If this command is typed in the
root directory, a list of available ports for printing is displayed. For supported HP Jetdirect
print servers, only
port1
is available.
ls
pwd
Displays the current directory or the current Jetdirect printing port.
put <filename>
<filename>
specifies the file to send to the selected HP Jetdirect print server port
(Port 1).
bin
Configures an FTP binary (image) file transfer.
ascii
Configures an FTP ASCII file transfer. HP Jetdirect print servers support only non-print
format control for character transfers (standard values for spacing and margins are
used).
Ctrl C
Press the
Ctrl
and
C
keyboard keys simultaneously to abort the FTP service command
and any transfer of data. The data connection is closed.
rhelp
remotehelp
This command depends on your client system (use rhelp on UNIX, or remotehelp on
Windows 2000/Server 2003) and displays a list of FTP system commands supported
by the print server. (Note: The commands displayed are
not
user commands. User-
accessible commands depend on the client's FTP system.)
ENWW
Using FTP Printing
155
Содержание Jetdirect J7974E
