Advanced
This tab provides configuration of additional TCP/IP parameters described below.
Table 4-8
TCP/IP Advanced tab
Item
Description
Idle Timeout
(IPv4 or IPv6) Specifies the number of seconds that an idle connection is allowed to
remain open. Up to 3600 seconds can be set. 270 is the default value. If set to 0, the
timeout is disabled and TCP/IP connections will remain open until closed by the device
at the other end of the network (for example, a workstation).
LPD Banner Page
(IPv4 or IPv6) Specifies whether to enable or disable printing of an LPD banner page
for print jobs. For currently supported print servers, only a single port is available (Port
1).
System Contact
(IPv4 or IPv6) Identifies a person who is assigned to administer or service this device.
This field may include a phone number or similar information.
When configured, this parameter will be displayed on the HP Jetdirect home page.
System Location
(IPv4 or IPv6) Specifies the physical location of the device or related information. Only
printable ASCII characters are allowed, up to 64 characters.
When configured, this parameter will be displayed on the HP Jetdirect home page.
Proxy Server
(For printers/MFPs that support this feature)
(IPv4 only) Specifies the proxy server to be used by embedded applications in your
printer/MFP. A proxy server is typically used by network clients for Internet access. It
caches Web pages, and provides a degree of Internet security, for those clients.
To specify a proxy server, enter its IP address or fully-qualified domain name. The name
can be up to 64 characters.
For some networks, you may need to contact your Independent Service Provider (ISP)
for the proxy server address.
Proxy Server Port
(For printers/MFPs that support this feature)
(IPv4 only) Enter the port number used by the proxy server for client support. The port
number identifies the port reserved for proxy activity on your network, and can be a
value from 0 to 65535.
Proxy Server User Name
(For printers/MFPs that support this feature)
(IPv4 only) If a user account on the proxy server has been set up, enter the name of the
user account.
Proxy Server Password
(For printers/MFPs that support this feature)
(IPv4 only) If a user account on the proxy server has been set up, enter the password
of the user account.
Proxy Server Exception List
(For printers/MFPs that support this feature)
(IPv4 only) Enter Web addresses, host names, or domain names that do not need to
be accessed through the proxy server. Use semicolons (;) to separate entries.
Default IP
(IPv4 only) Specifies the IP address to use when the print server is unable to obtain an
IP address from the network during a forced TCP/IP reconfiguration (for example, when
manually configured to use BOOTP/DHCP).
LEGACY DEFAULT_IP
: sets the legacy default IP address 192.0.0.192.
ENWW
Networking Tab
71
Содержание Jetdirect J7974E
