manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 432 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 432

9-38

ET User’s Guide

Specifications

Automation

Controlling via HP-IB

Interface: HP-IB interface operates to IEEE 488.2 and SCPI
standard interface commands.

Control: The analyzer can either be the system controller, or pass
bus control to another active controller.

Data Transfer Formats:

• ASCII

• 32- or 64-bit IEEE 754 floating-point format

• mass memory-transfer commands allow file transfer between

external controller and analyzer

Controlling via LAN

The built-in LAN interface and firmware support data transfer and
control via direct connection to a 10 Base-T (Ethertwist) network. A
variety of standard protocols are supported, including TCP/IP, sockets,
ftp, http, telnet, bootp, and NFS. The LAN interface is a standard
feature.

SCPI: The analyzer can be controlled by sending Standard
Commands for Programmable Instruments (SCPI) commands within
a telnet session or via a socket connection and TCP/IP (the default
socket port is 5025). The analyzer’s socket applications programming
interface (API) is compatible with Berkeley sockets, Winsock and
other standard socket APIs. Socket programming can be done in a
variety of environments, including C programs, HP VEE, SICL LAN,
or Java applets. A standard web browser and the analyzer’s built-in
web page can be used to remotely enter SCPI commands via a Java
applet.

FTP:

Instrument state and data files can be transferred via

file-transfer protocol (ftp). An internal dynamic data disk, which is an
ftp directory, provides direct access to instrument states, screen
dumps, trace data, and operating parameters.

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов