manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 348 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 348

8-56

ET User’s Guide

Hardkey/Softkey Reference

M

Softkey in the display frequency resolution menu and the numeric
entry menu.

When pressed in the display frequency resolution menu, displays the
frequency to MHz resolution. For example, 1.234 567 MHz is displayed
as 1 MHz (note rounding down).

Access Keys:

Softkey in the edit limit (min/max) menu. Use this key to set the
minimum limit for the marker limit function that is currently
highlighted in the on-screen table.

See

“To Use Marker Limit Functions” on page 4-32

 for more

information.

Access Keys:

Softkey in the marker search menu. Places the active marker at the
frequency point of minimum amplitude. If tracking is off, the marker
remains at that frequency. If tracking is on, the marker moves to the
minimum point with each sweep.

See

“Using Markers” on page 4-3

 for more information.

Access Keys:

Softkey in the

 menu. Displays the menu with selections

suitable for mixer and frequency converter measurements: conversion
loss and reflection.

See

“Measuring Conversion Loss” on page 3-45

 for an example

conversion loss measurement.

Softkey in the annotation options menu. Toggle to ON if you want to
view the marker information in the upper right corner of the display.

See

“Customizing the Display” on page 4-45

 for more information.

Access Keys:

 MHz

FREQ

 Disp Freq Resolution

 Min Limit

DISPLAY

 Limit Menu  Mkr Limits

 Edit Limit (Min/Max)

 Min Search

MARKER

 Marker Search

 Mixer

BEGIN

 Mkr Annot

 ON off

DISPLAY

 More Display  Annotation Options

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов