manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 338 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 338

8-46

ET User’s Guide

Hardkey/Softkey Reference

L

L

Softkey in the

 menu. Displays the menu to setup

the following LAN functions on your analyzer: LAN port, login user
list, NFS devices, BOOTP, SICL LAN, and SCPI socket.

Refer to The LAN Interface User’s Guide Supplement for information.

Softkey in the LAN menu. Displays the menu to set up the LAN port
on your analyzer.

Refer to The LAN Interface User’s Guide Supplement for information.

Access Keys:

Softkey in the select copy port menu. Sets the recognized IP address of
a LAN printer.

Refer to The LAN Interface User’s Guide Supplement for information.

Access Keys:

Softkey in the define printer menu. Sets the printer to print hardcopy
so that the paper is oriented with the longer edge at the top and the

shorter edges at the sides. Toggles with

.

Access Keys:

Softkey in the more printer menu. Sets the left margin (non-printing
space) in mm (25.4 mm = 1.00 inches). Minimum setting is 0.00 mm
(default); maximum is 200 mm.

Access Keys:

Softkey in the

 menu. Sets the RF power level of the

analyzer's source.

See

Chapter 9, “Specifications,”

 for the minimum and maximum power

levels for your analyzer.

 LAN

SYSTEM OPTIONS

 LAN Port Setup

SYSTEM OPTIONS

 LAN

 LAN Printr

 IP Addr

HARDCOPY

 Select Copy Port

 Landscape

 Portrait

HARDCOPY

 Define Printer

 Left Margin

HARDCOPY

 Define Printer  More Printer

 Level

POWER

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов