manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 361 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 361

ET User’s Guide

8-69

Hardkey/Softkey Reference

R

R

Softkey in the narrowband internal menu. Selects the tuned receiver
measurement of input R (reference signal).

See

“Measuring Devices with Your Network Analyzer” on page 3-3

 for

information on receiver inputs.

Access Keys:

or

,

Softkey in the broadband internal menu. Selects the diode detection
type measurement of input R* (broadband internal reference signal).

See

“Measuring Devices with Your Network Analyzer” on page 3-3

 for

information on receiver inputs.

Access Keys:

or

,

Softkey in the programs menu. Displays the character entry menu to
re-title the program and save it to memory or disk.

See the HP Instrument BASIC User's Handbook Supplement for more
information.

Access Keys:

Softkey in the

 menu. Displays the character entry

menu to re-title the file and save it to internal RAM or 3.5” disk. Also
can be used when saving a file for the first time if you wish to give the
file a specific name, rather than having the analyzer automatically
name it.

Softkey in the more format menu. Displays only the real (resistive)
portion of the measured data on a Cartesian format. This is similar to
the linear magnitude format, but can show both positive and negative
values.

Access Keys:

 R

MEAS 1

MEAS 2

 Detection Options

 Narrowband Internal

 R*

MEAS 1

MEAS 2

 Detection Options

 Broadband Internal

 Re-Save

 Program

SAVE RECALL

 Programs

 Re-Save State

SAVE RECALL

 Real

FORMAT

 More Format

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов