manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 315 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 315

ET User’s Guide

8-23

Hardkey/Softkey Reference

D

Softkey in the open, short, load, and through menus. Allows you to
modify the delay characteristic of the open, short, load, or through
calibration standards in your calibration kit.

 See

“Calibration Kits” on page 6-16

 for more information.

Access Keys:

,

 or

 or

 or

Softkey in the

 menu. Sets the aperture in Hz or % for group

delay measurements.

Softkey in the file utilities menu. Deletes all files in the current
directory. Before the files are deleted, you will be asked to confirm this
selection. Also deletes empty directories on DOS disks.

See

“Other File Utilities” on page 4-63

 for more information.

Access Keys:

Softkey in the delete limit menu. Deletes all of the limit lines in the
limit line table. Asks for confirmation before deletion occurs.

See

“Using Limit Testing” on page 4-28

 for more information on using

limit lines.

Access Keys:

Softkey in the users setup menu. Displays a dialog box for deleting all
users from the access list of your analyzer.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey used for editing titles, file names, directory names, and
IBASIC programs.

Softkey in the file utilities menu. Deletes the file that is highlighted.

See

“Other File Utilities” on page 4-63

 for more information on file

utilities.

Access Keys:

 Delay

CAL

 More Cal  Cal Kit

 Modify (connector type)

 Open

 Short

 Load

 Thru

 Delay Aperture

AVG

 Delete All Files

SAVE RECALL

 File Utilities

 Delete All

 Limits

DISPLAY

 Limit Menu  Delete Limit

 Delete All Users

SYSTEM OPTIONS

 LAN

 Login User Setup

 Delete Char

 Delete File

SAVE RECALL

 File Utilities

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов