manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 364 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 364

8-72

ET User’s Guide

Hardkey/Softkey Reference

R

Softkey in the automount setup menu and the mount NFS device
menu. Displays a dialog box for entering the remote host file system
name for an NFS device.

Access Keys:

or

See The LAN Interface User’s Guide Supplement for more information.

Softkey in the automount dev table menu and the  NFS device table
menu. Displays an expanded version of the remote  file system
information found in the automount device table and the NFS device
table.

Access Keys:

or

See The LAN Interface User’s Guide Supplement for more information.

Softkey in the automount setup menu. Displays the automount device
table, which lists the currently automounted NFS devices. Highlight
the device you want to remove from the table and press the softkey
which corresponds to that device.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the directory utilities menu. Allows you to delete empty
directories only. Highlight the intended directory, then press
this softkey.

See

“To Use Directory Utilities” on page 4-65

 for more information.

Access Keys:

 Remote Path

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Automount Setup

 Mount NFS Device

 Remote Path

 Host

SYSTEM OPTIONS

 LAN  NFS Device Setup

 NFS Device Table

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Automount Setup  Automount Device Table

 Remove

 Automount

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Automount Setup

 Remove

 Directory

SAVE RECALL

 File Utilities  Directory Utilities

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов