HP HP 8712ET, Руководство пользователя, Страница: 182 / 480

4-64 ET User’s Guide
Using Instrument Functions
Saving and Recalling Measurement Results
4. To copy the file, press .
5. To copy all the files in the current directory, press
and then select the destination disk for the files to be copied.
6. You will then be prompted to tell the analyzer where on the
destination disk to put the files to be copied.
7. Press if you want the files to go into the main, or root,
directory of the destination disk. Use a keyboard (if connected) or the
front panel knob and the softkeys to enter a subdirectory on the
destination disk before pressing
.
To Access Files
from SCPI, IBASIC,
or FTP Files on each disk can be accessed via HP-IB using SCPI commands,
directly from IBASIC, or over a LAN. The table below shows the names
used for each disk. You will notice that when using the file utilities, the
analyzer displays the SCPI name in the disk catalog window and in the
filename entry windows.
NOTE
The dynamic data disk is an internal FTP directory called “data.” For
more information, refer to “Accessing the Analyzer’s Dynamic Data
Disk,” located in The LAN Interface User’s Guide Supplement.
Table 4-1 Disk Access
• For more details on HP-IB programming, refer to the Programmer's
Guide and the Example Programs Guide.
• For more details on IBASIC disk access, refer to the IBASIC "MASS
STORAGE IS" keyword in the HP Instrument Basic User's
Handbook.
• For more details on FTP disk access via LAN, refer to The LAN
Interface User's Guide Supplement.
Enter
Copy All Files
Enter
Enter
Disk SCPI name IBASIC name FTP directory
Non-Volatile RAM
Disk
MEM:
file file
:MEMORY,0,0 /nvram/
file
Volatile RAM Disk
RAM:
file file
:MEMORY,0,1 /ram/
file
Internal 3.5” Disk
INT:
file file
:INTERNAL /int/
file
Dynamic Data Disk
DATA:
file not supported
/data/
file