manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 301 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 301

ET User’s Guide

8-9

Hardkey/Softkey Reference

A

Softkey in the NFS device setup menu. Displays the authentication
menu which allows you to enter a User ID and a Group ID for your
NFS remote file system.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the define printer and define plotter menus. Toggles the
paper autofeed feature on and off. Default is on.

Access Keys:

or

Softkey in the automount setup menu and the mount NFS device
menu. After an NFS device is mounted sucessfully, select this key to
add it to the automount device table. The NFS device will
automatically be remounted on powerup of the analyzer.

 See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

  or

Softkey in the automount setup menu. Displays a table listing the
currently automounted NFS devices.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the NFS device setup menu. Displays the automount setup
menu which allows you to add or remove an NFS device on the
automount device table.

See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the

 menu. Scales the data trace vertically to fit

within the graticule area of the display.

Softkey in the BEGIN menu. Enables the analyzer to search for an
IBASIC autostart file (AUTOSTART.BAS). If found, the file is loaded
and run. The analyzer first searches  for the file in non-volatile RAM
and next searches a floppy disk in the built-in disk drive.

 Authentication

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Auto Feed

 ON off

HARDCOPY

 Define Printer

 Define Plotter

 Automount

 At Powerup

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Automount Setup

 Mount NFS Device

 Automount

 Dev Table

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Automount Setup

 Automount

 Setup

SYSTEM OPTIONS

 LAN  NFS Device Setup

 Autoscale

SCALE

 Autost

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов