manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 313 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 313

ET User’s Guide

8-21

Hardkey/Softkey Reference

D

Softkey in the user TTL config menu. Pressing this softkey configures
the rear panel USER TTL IN/OUT connector for general purpose I/O
use with IBASIC and SPCI commands. This connector can also be
configured for softkey sequencing using an external switch, and as a
sweep out connector.

See "User-Defined TTL Input/Output" in the Automating
Measurements User’s Guide Supplement, and

Figure 7-2 on page 7-4

for more information.

Access Keys:

Softkey in the

 menu when measuring reflection. Use this key to

recall a one-port calibration that was performed at the factory or
during servicing. Corrects for directivity, source match, and frequency
response errors.

 See

Chapter 6

 for more information on calibrating the analyzer.

Softkey in the color options menu. Sets the external VGA monitor
colors to the Default 2 setting.

See

“Using an External VGA Monitor” on page 4-86

 for more

information.

Access Keys:

Softkey in the define hardcopy menu. Displays the menu to define
which parts of the graph are to be printed or plotted: trace data,
graticule, annotation, marker symbol, title and clock, or combinations.

See

“Printing and Plotting Measurement Results” on page 4-77

.

Access Keys:

Softkey in the

 menu. Displays the menu to define the

hardcopy in terms of information to be copied. Default setting is

See

“Printing and Plotting Measurement Results” on page 4-77

.

 Default

SYSTEM OPTIONS

 System Config

 User TTL Config

 Default 1-Port

CAL

 Default 2

DISPLAY

 More Display  Color Options

 Define Graph

HARDCOPY

 Define Hardcopy

 Define

 Hardcopy

HARDCOPY

 Graph Only

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов