manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 124 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 124

4-6

ET User’s Guide

Using Instrument Functions

Using Markers

To Use Marker Search Functions

Markers can be used to:

• search a measurement trace for maximum or minimum points

• search for a target value

• automatically calculate bandwidth or notch parameters of filters

• automatically search for multiple maximums or minimums

NOTE

Marker tracking can be useful for tuning DUTs when combined with the
marker search functions. When tracking is turned on, the marker search
is applied to the active marker and is updated with each sweep. To turn
tracking on, press

 and then select the

type of search you will be performing. Then press

 (if

necessary), and

.

CAUTION

It is possible to select marker search types on measurement channel 1
that are incompatible with those on measurement channel 2, and vice
versa. Doing so can cause the markers on the inactive channel to be
moved. Be careful to ensure you are using the correct markers for the
measurement channel you are currently measuring, especially when
marker tracking is turned on.

To Use Max Search
and Min Search

The maximum search functions scan for peak points on the
measurement trace. The minimum search functions scan for minimum
points on the measurement trace.

1. Press

 to place

marker 1 at the maximum value on the trace.

2. Press

 to place marker 2 at the minimum

value on the trace.

3.

Figure 4-3

 shows markers 1 and 2 at the maximum and minimum

points, respectively.

MARKER

 Marker Search

Prior Menu

 Tracking on OFF

 Marker Search  Max Search  Mkr

−

> Max

Prior Menu Prior Menu  2:  Marker Search

 Min Search  Mkr

−

> Min

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов