manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 309 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 309

ET User’s Guide

8-17

Hardkey/Softkey Reference

C

Softkey in the define printer and define plotter menus. Used to define
the printer or plotter as a multi-color device as opposed to a one color
(monochrome) device.

See

“Connecting and Configuring Printers and Plotters” on page 4-67

for more information.

Access Keys:

,

or

Softkey in the more display menu. Allows you to customize the colors
on an external VGA monitor connected to the rear panel VIDEO OUT
connector.

See

“Using an External VGA Monitor” on page 4-86

 for more

information.

Access Keys:

Softkey in the add login user menu. Displays a dialog box for
confirming a password to be added to the access list of your analyzer.

 See The LAN Interface User’s Guide Supplement for more information.

Access Keys:

Softkey in the select disk menu. Displays the menu to modify the
memory allocation for the internal volatile RAM disk.

Access Keys:

Softkey in the IBASIC menu. Restarts a program that has been
paused.

See the HP Instrument BASIC User's Handbook and Supplement for
more information on using IBASIC.

Access Keys:

Softkey in the trigger menu. In the continuous mode, the analyzer is
triggered continuously, beginning its next sweep at the conclusion of
the current sweep. Continuous is the default trigger mode.

Access Keys:

 Color

HARDCOPY

 Define Printer

 Define Plotter

 Color Options

DISPLAY

 More Display

 Confirm

 Password

SYSTEM OPTIONS

 LAN

 Login User Setup

 Add Login User

 Configure

 VOL_RAM

SAVE RECALL

 Select Disk

 Continue

SYSTEM OPTIONS

 IBASIC

 Continuous

MENU

 Trigger

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов