manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 344 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 344

8-52

ET User’s Guide

Hardkey/Softkey Reference

M

M

Softkey in the more format menu. Displays choices for various
magnitude units for the y-axis scale.

Access Keys:

Softkey in the directory utilities menu. Displays the character entry
menu for entry of the directory name.

See

“To Use Directory Utilities” on page 4-65

 for more information.

Access Keys:

Softkey in the

 menu. This softkey is only available when using

internal or external broadband detectors. Compensates for detector
drift one time when selected. When your external RF source is at the
detectors, this is the recommended setting to coordinate RF off and
zeroing.

Softkey in the add max line, add min line, add max point, and add min
point menus. Adds a marker to the data trace and allows it to be moved
to identify trace frequencies and amplitudes.

Access Keys:

,

or

or

or

Hardkey in the CONFIGURE area. Displays the menu to set markers,
use marker search and delta markers.

See

“Using Markers” on page 4-3

 for more information.

Softkey in the marker functions menu. Changes the center frequency
to that of the active marker and modifies the frequency span
accordingly. If markers are off, it first turns on marker #1 at its
previous setting or at the center frequency (default).

Access Keys:

 Mag Units

FORMAT

 More Format

 Make Directory

SAVE RECALL

 File Utilities  Directory Utilities

 Manual Zero

CAL

 Marker

DISPLAY

 Limit Menu  Add Limit

 Add Max Line

 Add Min Line

 Add Max Point

 Add Min Point

MARKER

 Marker

−

>

 Center

MARKER

 Marker Functions

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов