manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 335 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 335

ET User’s Guide

8-43

Hardkey/Softkey Reference

I

Softkey in the IBASIC edit menu. Invokes the insert line menu for
editing IBASIC programs.

See the HP Instrument BASIC User's Handbook Supplement for more
information.

Access Keys:

Softkey in the define save menu. When on, allows you to save the
instrument state.

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

Access Keys:

Softkey in the update correction constants menu. Loads a permanent
copy of CC data from a floppy disk to internal EPROM. This must be
done after loading new firmware into the analyzer.

See the Service Guide for more information.

Access Keys:

Softkey in the service menu. Displays the analyzer’s firmware revision
and date, bootROM version, serial number, options, system impedance,
and amount of memory.

Access Keys:

Softkey in the custom colors menu. This key only affects the analyzer's
internal display. This key changes the brightness of the selected
display item. Values accepted are 0 to 100%, with 0 resulting in black
(not visible) and 100 resulting in full brightness.

Access Keys:

Softkey in the trigger source menu. Selects an automatic, internal
trigger.

Access Keys:

 Insert Line

SYSTEM OPTIONS

 IBASIC  Edit

 Inst State

 ON off

SAVE RECALL

 Define Save

 Install CC

 From Disk

SYSTEM OPTIONS

 Service  Update Corr Const

 Instrument Info

SYSTEM OPTIONS

 Service

 Int Disp

 Intensity

DISPLAY

 More Display  Color Options

 Custom Colors

 Internal

MENU

 Trigger  Trigger Source

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов