manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 366 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 366

8-74

ET User’s Guide

Hardkey/Softkey Reference

R

Softkey in several

 menus, the CRT adjust menu, the

SICL LAN setup menu, and the SCPI sock. setup menu.

If this key is pressed in the

 menus, it resets parameters

such as addresses, baud rates, handshakes, color, pens, resolution, and
margins to predetermined values.

See

“Printing and Plotting Measurement Results” on page 4-77

 for

more information on using the

 menus.

If this key is pressed in the CRT adjustment menu, it restores the
default CRT timing values.

If this key is pressed in the SCPI sock. setup menu or the  SICL LAN
setup menu, it resets the socket port number or the HP-IB device
address, HP-IB logical unit number, and HP-IB name, respectively, to
predetermined values.

See The LAN Interface User’s Guide Supplement for more information.

Softkey in the cal check menu. Returns to the measurement mode after
viewing measurement uncertainties with View Cal Check. This key
also autoscales the display.

Refer to

Chapter 6

 for more information on using cal check.

Access Keys:

Softkey in the marker math menu. Measures both the passband and
stopband of a filter in one sweep.

See

“To Use Marker Math Functions” on page 4-18

 for more

information.

Access Keys:

 Restore

 Defaults

HARDCOPY

HARDCOPY

HARDCOPY

 Restore Meas

CAL

 Cal Check

 RF Filter Stats

MARKER

 Marker Functions  Marker Math

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов