manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 314 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 314

8-22

ET User’s Guide

Hardkey/Softkey Reference

D

Softkey in the

 menu. Displays the menu to define a

PCL5 printer in terms of color, orientation, autofeed, and margins.

See

“Connecting and Configuring Printers and Plotters” on page 4-67

for more information.

Softkey in the set pen numbers menu. Resets the plotter pen number
assignments to their default values.

See

“Define the Printer or Plotter Settings” on page 4-72

 for default

values.

Access Keys:

Softkey in the

 menu. Displays the menu to define the

plotter in terms of color, pen numbers, and autofeed.

See

“Connecting and Configuring Printers and Plotters” on page 4-67

for more information.

Softkey in the

 menu. Displays the menu to define the

printer in terms of color, orientation, autofeed, resolution, and
margins.

See

“Connecting and Configuring Printers and Plotters” on page 4-67

for more information.

Softkey in the

 menu when measuring transmission. Use this

key to recall a response calibration that was performed at the factory
or during servicing. Corrects for frequency response errors.

 See

Chapter 6

 for more information.

Softkey in the

 menu. Displays the menu to save the

instrument state, measurement calibration, measurement data, or
combinations. Allows the choice of saving trace data in ASCII format
for output to spreadsheets. ASCII data is compatible with Lotus 1-2-3
and Touchstone formats.

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

 Define PCL5

HARDCOPY

 Default

 Pen Colors

HARDCOPY

 Define Plotter  Set Pen Numbers

 Define Plotter

HARDCOPY

 Define Printer

HARDCOPY

 Default

 Response

CAL

 Define Save

SAVE RECALL

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов