manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 369 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 369

ET User’s Guide

8-77

Hardkey/Softkey Reference

S

Softkey in the save ASCII menu. Selects measurement channel 2 data
to be saved as ASCII data. This data can be imported into a
spreadsheet or word processing program.

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

Access Keys:

Softkey in the programs menu. Saves the current program to internal
RAM or 3.5” disk.

See the HP Instrument BASIC User's Handbook Supplement for more
information.

Access Keys:

Hardkey in the SYSTEM area of the front panel. Displays menus to:
save, title, define, and recall states and programs; rename, delete, and
copy files; select, configure, and format disks.

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

Softkey in the

 menu. Saves information to internal

RAM or 3.5” disk, automatically naming the file "STATE#."

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

Hardkey in the CONFIGURE area of the front panel. Allows changing
of scale per division, reference level, and reference position for
optimum viewing of measurements. Also accesses the reference
tracking, phase offset, and electrical delay functions.

See

“Entering Measurement Parameters” on page 2-4

 and

“Using

Reference Tracking” on page 4-42

 for more information.

Softkey in the

 menu. Sets the value of vertical divisions of

graticule. For example, if the scale/div is 10 dB, each graticule line is
10 dB higher than the one below.

 Save Meas 2

SAVE RECALL

 Define Save  Save ASCII

 Save Program

SAVE RECALL

 Programs

SAVE RECALL

 Save State

SAVE RECALL

SCALE

 Scale/Div

SCALE

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов