manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 155 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 155

ET User’s Guide

4-37

Using Instrument Functions

Using Limit Testing

Other Limit Line Functions

To Turn Limit
Lines On and Off

Using the

softkey toggles any created limit lines on

and off; it does not delete them. You can still use the limit test function
(pass/fail) without the limit lines appearing on the display screen. To
access this key, press

.

To Delete Limit
Lines

1. To select a limit line or point to delete, you must be in the main limit

line menu.

2. To easily ensure you are in the main limit line menu, press

.

3. Use the front panel knob or the

 keys to select the limit

you wish to delete. The selected limit will appear in inverse video in
the limit table.

4. Press

. The analyzer then gives you the option to

cancel the deletion, go ahead with the individual deletion, or delete
all the currently set limits.

To Move the
Pass/Fail
Indicator Text and
Icon

The limit test pass/fail indicator and text can be moved to any position on
the display screen.

To move the position of the pass/fail indicator:

1. Press

.

2. Press

 and use the front panel knob or the

 keys to position the pass/fail indicator along the

horizontal axis. You can also place the indicator along the horizontal
axis by entering a percentage using the numeric keypad. Enter a
whole number from 0 to 100, where 0 represents the far left of the
display, and 100 represents the far right of the display.

3. Press

 and use the front panel knob or the

 keys to position the pass/fail indicator along the vertical

axis. You can also place the indicator along the vertical axis by
entering a percentage using the numeric keypad. Enter a whole
number from 0 to 100, where 0 represents the bottom of the display,
and 100 represents the top of the display.

 Limit Line ON off

DISPLAY

 Limit Menu  Limit Options

DISPLAY

 Limit Menu

 Delete Limit

DISPLAY

 Limit Menu  Limit Options

 Limit Icon X Position

 Limit Icon Y Position

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов