manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 179 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 179

ET User’s Guide

4-61

Using Instrument Functions

Saving and Recalling Measurement Results

4. If you have previously saved any files to this disk, they will now be

listed on the display.

5. The fast recall feature utilizes only the first seven files listed that

contain instrument state, calibration, or measurement data.

6. If you have not previously saved any files to this disk, you may want

to save a few instrument states now, to follow along.

7. Press

. Note that the

measurement display now reappears on the screen and that there are
file names next to the first seven softkeys. (If any of the softkeys are
blank, it's because you had less than seven files saved on the disk.)

The files are placed on the softkeys in the order in which they appear
in the disk's directory table.

NOTE

You may want to use the

 feature to give your files more

meaningful names. See

“Other File Utilities” on page 4-63

 for

information on renaming files.

8. To "fast recall" an instrument state, press the softkey next to the file

that contains the instrument state.

9. The fast recall toggle will remain on (even when the analyzer is

) until manually turned off.

10. With the fast recall feature turned on, you will always be only 1 or 2

key presses away from recalling an instrument state.

11. With an external keyboard connected to the rear panel DIN

connector, keys F1 through F7 are equivalent to pressing softkeys 1
through 7 on the analyzer. See

“Using a Keyboard” on page 4-82

 for

information on connecting and using an external keyboard.

Prior Menu  FastRecall on OFF

 Rename File

PRESET

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов