manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 368 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 368

8-76

ET User’s Guide

Hardkey/Softkey Reference

S

S

Softkey in the custom colors menu. Use this key to customize the colors
of display items on your external monitor. Saturation is the amount of

pure color (selected with the

 key) to be mixed with white.

Saturation values are expressed as a percentage: 0 to 100%, with 0
representing no color, and 100 representing no white.

See

“Using an External VGA Monitor” on page 4-86

 for more

information.

Access Keys:

Softkey in the define save menu. Selects which measurement channel's
(1 or 2) trace data is to be saved in ASCII format for output. Also
allows you to choose whether to save in Lotus 123 or Touchstone
format for spreadsheet use.

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

Access Keys:

Softkey in the programs menu. Titles the current program AUTOST

and saves it to internal RAM or a 3.5” disk as set by

. At

power-up, the network analyzer searches the internal non-volatile
RAM disk and the floppy disk in the analyzer’s built-in disk drive for
an AUTOST (auto-start) file, loads it, and executes it if present.

Access Keys:

Softkey in the save ASCII menu. Selects measurement channel 1 data
to be saved as ASCII data. This data can be imported into a
spreadsheet or word processing program.

See

“Saving and Recalling Measurement Results” on page 4-55

 for

more information.

Access Keys:

 Saturation

 Hue

DISPLAY

 More Display  Color Options

 Custom Colors

 Save ASCII

SAVE RECALL

 Define Save

 Save AUTOST

 Select Disk

SAVE RECALL

 Programs

 Save Meas 1

SAVE RECALL

 Define Save  Save ASCII

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов