manualshive.com logo in svg

HP HP 8712ET, Руководство пользователя, Страница: 177 / 480

Поделиться
Скачать
HP HP 8712ET Скачать руководство пользователя страница 177

ET User’s Guide

4-59

Using Instrument Functions

Saving and Recalling Measurement Results

To Save
Measurement
Data in ASCII
Format

Your measurement data can be saved in an ASCII format that is
compatible with many personal computer software packages.

To save the measurement trace as an ASCII file:

1. Press

, and select the softkey that

corresponds to where you want to save your file. (See

“Select the Disk”

on page 4-57

.)

2. Press

.

a. Choose

 or

.

• Lotus

1-2-3

 format is a two-column format that is

compatible with many personal computer software packages.
Column 1 is the frequency point, and column 2 is the measured
value at that point.

• Touchstone format (also called S2P data format) is useful for

importing measurement data into CAE programs such as
Hewlett-Packard's Microwave Design System (MDS) and
Advanced Design System (ADS). Since your analyzer cannot
make full two-port measurements, saving in Touchstone
format is generally only useful when measuring reflection
response.

b. Choose

 or

, depending on which

measurement channel data you want to save.

3. The filename appears on the network analyzer screen as

TRACE#.PRN

(for Lotus 1-2-3 files) or

TRACE#.S1P

 (for Touchstone files), where # is

a number the analyzer selects from 0 to 999.

NOTE

Your analyzer can store files only on floppy disks that are formatted in
MS-DOS.

SAVE RECALL

 Select Disk

Prior Menu  Define Save  Save ASCII

 Lotus 123 Format

 Touchstone Format

 Save Meas 1

 Save Meas 2

Содержание HP 8712ET

































































































































































































































































































































































































































































































Отзывы:

Нет отзывов