HP AlphaServer TS15, Руководство пользователя

Страница: 230 / 252

7.4 Console-Reported Failures
Table 7–5 Troubleshooting Console-Reported Failures
Symptom Action
Power-up tests do not complete. Use error beep codes or console serial terminal to
determine what error occurred.
Check the power-up screen for error messages.
Enter the RMC and use the poe command to check for
poweron errors; use the log or log # command to check
the event log for symptoms of failure.
Console program reports an
error. Interpret the error beep codes at power-up and check
the power-up screen for a failure detected during self-
tests.
Examine the console event log (use the more el
command) to check for embedded error messages
recorded during power-up.
If the power-up screen or console event log indicates
problems with mass storage devices or PCI devices, or
if devices are missing from the
show config display,
see Section 7.10.
Enter the RMC and use the poe command to check for
poweron errors; use the log or log # command to check
the event log for symptoms of failure.
Use the SRM test command to verify the problem.
7-6 hp AlphaServer TS15 Owner's Guide