manualshive.com logo in svg

HP 8712C, Руководство пользователя, Страница: 468 / 559

Поделиться
Скачать
HP 8712C Скачать руководство пользователя страница 468

   

 

Reference

T

 

 in set pen numbers menu. Sets pen number assignment for data

trace 2 on hardcopy. Different pen numbers can represent different color or

width pens.

See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more
information.

Access Keys: 

C

HARD 

 

Define Plotter 

 Pan 

 

 in 

 graph menu. When on, prints or plots measurement trace

 

 data when Graph and 

 

 

or Graph 

 is selected.

 

 

 

 

 

 

 Graph

 in reference tracking menu. When this key is pressed, the

Frequency

measurement trace is 

 with each sweep so that the frequency set

with the 

 Track 

 key is placed on the reference line.

See “Using Reference Tracking” in Chapter 4 for more information.

Access Keys: 

 

 

 in reference tracking menu. When this key is pressed, the

Peak

measurement trace is 

 with each sweep so that the peak point on the

trace lies on the display reference line.

See “Using Reference Tracking” in Chapter 4 for more information.

Access Keys: 

 

 

 in marker search menu. When tracking is on, the marker search

 

functions are updated with each sweep. When tracking is off (default setting),
the functions are performed only once, when selected.

See “Using Markers” in Chapter 4 for more information.

Access Keys: 

 

 

9-83

Содержание 8712C
















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов