manualshive.com logo in svg

HP 8712C, Руководство пользователя, Страница: 308 / 559

Поделиться
Скачать
HP 8712C Скачать руководство пользователя страница 308

I

Automating Measurements

Operator Interaction

 

 

   

 

Devices under test 

 are often 

 with a serial number and part

number. If the DUT is 

 with this information in barcode form, a

barcode reader can be used to enter the DUT information into the analyzer
or into the computer controlling the analyzer. Doing so provides a simple
and safe link between the device under test and the measurement data.
Information such as the operator’s name or test station number can also be
entered, to allow correlation of the devices tested with the test station.

Connect a barcode reader, such as the HP 

 

 to the

analyzer’s DIN KEYBOARD connector (on the rear panel). Once connected,
the barcode reader will send scanned barcode characters to the analyzer just
as if they were typed on a keyboard. The barcode characters will be followed

by a carriage return. The barcode wand and the external keyboard can be

connected simultaneously.

See “Using the Analyzer’s Title Feature,” next in this section, for more

information on using the title feature with a barcode reader.

In addition to Hewlett-Packard’s barcode wand, other vendors offer products
such as cordless barcode readers, laser scanner readers, barcode label
printers, barcode fonts for Windows@, and barcode labeling software.

7 - 2 9

Содержание 8712C
















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов