HP 8712C, Руководство пользователя, Страница: 320 / 559

Measurement Setup and Control with
Recall
The production of RF components often involves several steps, each step
requiring a unique set of instrument settings. Likewise, the different test
configurations at each step may require associated calibrations. Manually
entering these sets of parameters (or “states;‘) or calibrating at each step in
the manufacturing process is slow, prone to error, and costly. The fast recall
feature
you to recall an instrument state with just 1 or 2 key presses,
to cycle through up to seven different instrument states with a foot switch.
N O T E
The following explanation assumes that you are familiar with the information presented in “Saving and
Recalling Measurement Results” in Chapter 4.
1. Press R
ECALL
].
2. If the measurement display area changes to a listing of on the
currently selected disk, fast recall is OFF.
If the measurement display area remains unchanged, fast recall is ON. lb
follow along with this explanation, turn fast recall OFF by pressing the
ON
3. If necessary, select the internal non-volatile RAM disk by pressing
RAM Disk.
4. If you have previously saved any files to this disk they will now be listed
on the display.
7-41