manualshive.com logo in svg

HP 8712C, Руководство пользователя, Страница: 458 / 559

Поделиться
Скачать
HP 8712C Скачать руководство пользователя страница 458

I

   

 

Reference

 

 in set clock menu. Use this key to set the month.

NOTE

When selecting the month, you will always input a number that corresponds to the month desired. If
the clock format is set to “alpha,” however, the displayed month will be a three letter abbreviation

(such as Mar for March).

Access Keys: 

(

SYSTEM OPTIONS

) 

System 

 

Set 

 

 in 

 plotter menu. Displays set pen numbers menu to assign pen

numbers to items to be plotted (like traces, graticule, etc.). In color setting,
different items can be plotted with different pens. In monochrome setting, all
items are printed with the same pen.

See “Connecting and Configuring Printers and Plotters” in Chapter 4 for more

information.

Access Keys: 

 

 

 

 

 in reference tracking menu. Allows you to identify a particular

frequency as a point of interest. After the frequency point is set, and
frequency tracking is turned on by pressing 

Track 

 , the analyzer

will always place the frequency point of interest on the display reference line.

See “Using Reference Tracking” in Chapter 4 for more information.

Access Keys: 

 

 

 

Содержание 8712C
















































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов