horsch Maestro 16 SX Скачать руководство пользователя страница 81

Страница: 81 / 158

Drill unit | 8

60026387 • 01 • 03/2021 • en

The rollers shall run symmetrically over the seed furrow.

4. Adjust the distance of the spike or finger press wheels using the sleeves sup-

plied.
Distances (a) and (b) must be equal. The press roller must turn freely and may
not collide with other components.

Profiled press rollers

• Width 50 mm

• recommended for dry conditions

• recommended on sandy light soils

• recommended for fine seeds

Profiled press rollers

8.1.5 Clearing stars (option)

The clearing stars clear stones and larger lumps of soil out of the drilling range. The
blade shape produces a cutting effect for high portions of organic substances.

The working height of the clearing stars is directly at field surface level. They can
also submerge slightly into the ground.

Содержание Maestro 16 SX































































































































































Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды

horsch Maestro 16 SX, Руководство по эксплуатации

Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды