manualshive.com logo in svg

horsch Maestro 16 SX, Руководство по эксплуатации

Поделиться
Скачать
horsch Maestro 16 SX Скачать руководство пользователя страница 52

6 | Operation

52

60026387 • 01 • 03/2021 • en

6.4.2 Checks

The working quality essentially depends on the adjustments and checks made prior
to and during use, as well as on regular care and maintenance of the machine.

Ø

Carry out all maintenance tasks and adjustments before starting to work.

NOTE

Ø

Check the placing quality (drilling depth, length and transverse distribution of
the seed) on all coulters when starting work and for larger fields also in
between.

NOTE

Ø

Perform checks when starting work and with larger fields also regularly in
between!

Machine

Ø

Have the hydraulic lines been connected without being mixed up by mistake?

Ø

Has the machine been levelled in working position?

Ø

Are all cultivation tools in serviceable condition?

Ø

Has the drilling depth been set correctly?

Pneumatic system /
Hydraulics

Ø

Have the hydraulic lines been connected without being mixed up by mistake?

Ø

Check the pressures on the pressure gauges on the seed hopper, see also the
chapter 

Pneumatic system

.

Ø

Are all air lines between fan and coulters leak tight and firmly connected?

Ø

Are the seed hoses free of sagging, water and other deposits?

Pneumatic system – fan

Ø

Is the hydraulic fan connected to a pressure-free return flow?

Ø

Are the fan and intake grille clean?

Ø

Is the fan wheel tightly mounted on the shaft?

Ø

Are fan speed and drive pressure not exceeded?

Pneumatic system –
Metering unit

Ø

Has the correct rotor been installed?

Ø

Have the sealing lips been adjusted and are they still serviceable?

Ø

In case of small seed, has the cleaning brush been installed and is it in order?

Ø

In the case of large seed, has the scraper been installed?

Ø

Are all connections airtight and has the discharge flap been closed firmly and
leak free?

Ø

Does seed flow out of all coulters?

Ø

Is seed bridging forming in the hopper, especially with husky seed?

Ø

Is the correct seed quantity being placed, especially in the case of small seed?

Содержание Maestro 16 SX































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды