horsch Maestro 16 SX Скачать руководство пользователя страница 140

Страница: 140 / 158

15 | Care and maintenance

140

60026387 • 01 • 03/2021 • en

NOTE

Do not clean electrical components, hydraulic cylinders and bearings with a
high pressure cleaner or direct water jet.
Housings, screw fittings and bearings are not waterproof under high pressure.

Clean every day when in use.

15.5 Machine storage

The following steps must be followed if the machine is to be shut down for a longer
period of time:

1. Park the machine in a hall or under a roof if possible.

2. Secure the machine with wheel chocks against rolling away.

3. Loosen the parking brake, if so equipped, to prevent the brake pads from

sticking.

4. Protect the machine against corrosion. For spray coating use only biodegrad-

able oils.

5. Protect the hydraulic cylinder piston rods against corrosion.

6. Relieve the wheels from any load.

7. Completely empty and clean the seed hopper and the metering chambers.

8. Unplug the terminal and store it in a dry place.

9. Do not rest the machine on the trap rollers.

Содержание Maestro 16 SX































































































































































Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды

horsch Maestro 16 SX, Руководство по эксплуатации

Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды