manualshive.com logo in svg

horsch Maestro 16 SX, Руководство по эксплуатации

Поделиться
Скачать
horsch Maestro 16 SX Скачать руководство пользователя страница 127

Optional equipment | 13

60026387 • 01 • 03/2021 • en

127

13.5 Agitator shaft

WARNING

Danger of injury

Ø

Open the flap for residual quantity emptying only when the machine has been
shut down and secured against restarting.

Ø

Never operate the agitator shaft with the discharge flap open.

Ø

Make sure before selecting the agitator shaft that no persons are present in
the danger zone.

During transport travel fertiliser is compressed through shocks and vibration and can
adhere to the hopper.

To prevent this, the fertiliser is loosened up with two agitator fingers. The agitator
fingers are operated by a hydraulic cylinder (1) outside the fertiliser hopper and
moved automatically during lift-out.
The agitator shaft is secured against overload with a shearing bolt (M8 x 60) (2).

1

2

3

Fertiliser hopper agitator shaft

The agitator shaft is mounted to the standard opening for residual emptying. The
opening for residual emptying is located below the agitator shaft (3) after assembly.

Ø

Close the closure of residual emptying tightly and check for leak tightness to
avoid metering errors.

Содержание Maestro 16 SX































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды