horsch Maestro 16 SX Скачать руководство пользователя страница 41

Страница: 41 / 158

60026387 • 01 • 03/2021 • en

6 Operation

WARNING

Whenever working on the machine pay attention to the associated safety
notes in the chapter "Safety and Introduction" as well as the accident preven-
tion regulations!

6.1 Tractor change

When changing the tractor, the machine must be adapted to the tractor.

Adapt the propshaft and the height of the drawbar eye/spherical cap, see
chapter

Commissioning

6.2 Connecting / Parking

DANGER

Serious accidents when manoeuvring and coupling!

Keep an eye on your environment.

Order persons to leave the manoeuvring area around the machine.

Instruct persons to leave the area between tractor and machine.

No person must be present in the danger zone when the tractor approaches
the machine or moves away from it!

WARNING

Leaking hydraulic fluid can cause serious injuries! Danger of injury by
unwanted machine movements.

Connect and disconnect the hydraulic lines only when the hydraulics are
without pressure on both tractor and machine.

6.2.1 Connecting

The machine must be properly connected to a tractor before any machine move-
ments.

DANGER

Serious accidents from loss of stability!

Park the machine only on a level and firm ground.

Secure the machine against rolling away before unhitching.

Содержание Maestro 16 SX































































































































































Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды

horsch Maestro 16 SX, Руководство по эксплуатации

Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды