horsch Maestro 16 SX Скачать руководство пользователя страница 122

Страница: 122 / 158

13 | Optional equipment

122

60026387 • 01 • 03/2021 • en

Spring accumulator brake
cylinder

DANGER

Serious accidents through the pretensioned spring

Never open the spring accumulator brake cylinder by force nor dismantle it!

Mechanical release fixture

The parking brake may need to be released without the required pressure being
available in the air vessel. To this end, the spring accumulators can be released using
the mechanical auxiliary release device.

Spring accumulator brake cylinder with installed release device (1)

1. Place wheel chocks under the wheels.

2. Remove the threaded rod from the parking position (2) and fasten it in the cyl-

inder (1).

3. Apply washer and nut and release the brake by unscrewing the threaded rod.

4. After the required measures (towing, retrieving, etc.) have been completed,

screw in the threaded rod to engage the brake again.

5. Pull the threaded rod with nut and washer from the brake cylinder and fasten

it in the parking position.

Maintenance

Drain the air vessel every day during operation.

Air vessel with drain valves

Содержание Maestro 16 SX































































































































































Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды

horsch Maestro 16 SX, Руководство по эксплуатации

Результаты поиска

Содержание Maestro 16 SX

Отзывы:

Бренды по названию

Популярные бренды