horiba Fluorolog-3 Скачать руководство пользователя страница 185

Страница: 185 / 240

Fluorolog-3 v. 2.2 (9 Aug 2002)

TRIAX operation with the Fluorolog

-3

14-8

Note:

The exit slit-width pa-

rameter is valid only for PMT
users. For CCD detectors,
there is no slit at the exit of
the TRIAX, so any displayed
settings are superfluous.

Note:

A CCD is

mounted on the
side (lateral)
exit, while a
PMT is mounted
on the front exit.

Adjusting slit widths

Click on an
icon of a
slit.

The

Slits

window

opens. All slits in the TRIAX are adjustable, no matter which slit you click.

Enter the desired
slit width.

In bandpass units (e.g.,
nanometers), all slits have the
same setting.

Click Move All.

This implements the change.

Click Close.

The

Slits

dialog box closes.

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Содержание Fluorolog-3

















































































































































































































































Результаты поиска

Содержание Fluorolog-3

Отзывы:

Бренды по названию

Популярные бренды

horiba Fluorolog-3, Руководство по эксплуатации

Результаты поиска

Содержание Fluorolog-3

Отзывы:

Бренды по названию

Популярные бренды