94
0 : off (released)
1 : on (activated)
0/1
0/1
0/1
Switch wheel guard
Depress pedal
Switch
Comments:
If the wheel guard switch remain to 0, before replacing it check also the low end switch of the wheel lift
because they are connected in serial.
After exit C56, turn off and on again the balancer to enable the pedal control.
C57
Indication of the temperature
Options:
None
Special function:
None
Description:
Indication of temperature in centigrade (°C)
Comments:
Please refer to error ID 580, 581, 585, 586 for the limits.
C59
Indication of the residual unbalance of main shaft compensated for using C84
Options:
None
Special function:
None
Description:
Indication of the residual unbalance of the main shaft and drive pulley compensated for using C84
Channel 1 corresponds to front transducer
Channel 0 corresponds to rear transducer
Maximum unbalance allowed:
Comments:
None
C60
Indication of RPM of main shaft
Options:
None
Special function:
None
Description:
As soon as measured data is available, the current speed is read out. The correct speed range must
be 195 to 205 Rpm.
Comments:
None
C61
Indication of the correction factors for user calibration
Options:
None
Special function:
None
Description:
The correction factors determined during user calibration are read out in form of 6 digits.
1st Read out:
Rear transducer.
2nd Read out:
Front transducer.
Comments:
None
SM HOF GEODYNA 7600 Rel.D