Hioki RM3545, Инструкция по эксплуатации, Страница: 287 / 364

Chapter 13 Specifications
279
13
(1) Conditions of guaranteed accuracy
(2) Additional accuracy (Add the following error components to the
instrument’s measurement accuracy.)
(3) Internal offset resistance
Measurement Specifications
Warm-up time Same as instrument with the Z3003.
Temperature and hu-
midity range for guaran-
teed accuracy 23±5°C, 80%RH or less
Period of guaranteed
accuracy 1 year
Accuracy specifica-
tions conditions When using a 2-wire setup, accuracy is guaranteed only after zero-adjustment.
Temperature coefficient From 0°C to 18°C and 28°C to 40°C, add a temperature coefficient of ±(1/10
of additional accuracy)/°C.
Effects of leak current Add a reading error as follows depending on the measurement current
(when using guarding)
(With humidity of less than 70% RH. If the humidity is greater than or equal to
70% RH, add the following rdg. error × 5.):
Effect of measurement
speed Add the f.s. error component as follows when the integration time is not a
whole-number multiple of the power supply cycle:
Effect of offset voltage Add the following resistance to the error when OVC is OFF
Effect of offset
resistance fluctuations When using a 2-wire setup, add the following wiring resistance to the error
component.
0.1 [
Ω
]
Internal measurement
circuit resistance value 0.5
Ω
(default)
1 × 10
-9
[A]
I
MEAS
[A]
× 100 [%rdg.]
I
MEAS
: Measurement current
A
fs
: f.s. error component for instrument with the Z3003
A
fs
× 0.5 [%f.s.]
10
×
10
-6
[V]
I
MEAS
[A]
[
Ω
]
I
MEAS
: Measurement current