Hioki RM3545 Скачать руководство пользователя страница 168

Страница: 168 / 364

8.3 Multiplexer Settings

160

Set the measurement conditions for each channel.

See:

Customizing Channel Pin Allocation" (p.152)

If you wish to initialize the multiplexer channel settings

See:

"7.7 Initializing (Reset)"(p.134)

Customizing Measurement Conditions for Individual Channels

Open the Settings Screen.

Open the Measurement Setting Screen.

Select the channel for which to set measurement conditions.

Set the measurement conditions.

<Hint>

The channel can be changed for each setting with the

and

keys.

(

See:

p.63)

Measurement conditions can be copied to the next channel. (

See:

p.157)

Return to the Measurement screen.

The Settings screen
appears.

Switch the function menu
to P.2/3.

Move the cursor to the
[MEAS] tab with the left and
right cursor keys.

−

Changes (decreases) the
channel.

CH+ :
Changes (increases) the
channel.

Return to the
Measurement screen.

Содержание RM3545













































































































































































































































































































































































Результаты поиска

Содержание RM3545

Отзывы:

Hioki RM3545, Инструкция по эксплуатации, Страница: 168 / 364

Результаты поиска

Содержание RM3545

Отзывы: