Hioki RM3545, Инструкция по эксплуатации, Страница: 13 / 364

Safety Information
5
Accuracy
We define measurement tolerances in terms of f.s. (full scale), rdg. (reading) and dgt. (digit) values, with the
following meanings.
See: "Example accuracy calculations" (p. 257)
Symbols for Various Standards
This symbol indicates that the product conforms to safety regulations set out by the
EC Directive.
WEEE marking:
This symbol indicates that the electrical and electronic appliance is put on the EU
market after August 13, 2005, and producers of the Member States are required to
display it on the appliance under Article 11.2 of Directive 2002/96/EC (WEEE).
Other Symbols
Indicates the prohibited action.
(p. )
Indicates the location of reference information.
*
Indicates that descriptive information is provided below.
[ ]
Square brackets indicate instrument display labels (such as setting item names).
SET
(Bold characters)
Bold characters within the text indicate operating key labels.
Unless otherwise specified, “Windows” represents Windows XP, Windows Vista, Windows 7, or
Windows 8.
f.s.
(maximum display value)
This is usually the name of the maximum displayable value. For this instrument, it
indicates the currently selected range.
rdg.
(reading or displayed value)
The value currently being measured and indicated on the measuring instrument.
dgt.
(resolution)
The smallest displayable unit on a digital measuring instrument, i.e., the input value
that causes the digital display to show a “1” as the least-significant digit.