Hioki IM7580, Инструкция по эксплуатации

Страница: 42 / 340

34
Setting Basic Settings of Measurement Conditions
3.2.3 Setting the Delay Time from Trigger to Measurement Start
(Trigger Delay)
The delay time period from input of the trigger signal to measurement (delay time) can be set.
With this function, it is possible to ensure that measurement is started after the connection condition
of the object to be tested and the test probe (fixture) has stabilized.
Refer to “8.1 External Input/Output Connector and Signals” (p. 195).
Trigger delay: OFF Trigger delay: ON
TRIG
― ― ― ―
EOM
―――
INDEX
― ――― ―
Signal
Measurement Calculation
TRIG
― ― ― ―
EOM
―――
INDEX
― ――― ―
Signal
Trigger delay
Measurement Calculation
While trigger delay is being used, the LED for indicating that measurement is in progress is lit.
1
6
3
2
1
Press [SETUP] .
2
Press [BASIC] tab.
3
Press [DELAY] .
The numeric keypad can be
used for input.
4
5
4
Set the delay time with

/

, or the numeric
keypad.
(With the numeric keypad, press [SET] .)
Settable range 0 s to 9.99999 s
Resolution
10 µs
[C]
The delay time becomes 0 s and this
function is disabled.
5
Press [EXIT] to close the trigger delay setting
screen.
6
Press [EXIT] to close the advanced settings
screen.