Hioki IM7580, Инструкция по эксплуатации

Страница: 333 / 340

A
21
Device Compliance Statement
Item Contents
5
:GRAPh:VERTical:CENTerdiv?............ 2
:GRAPh:VERTical:UPPerlower?........... 2
:LIST:STARt:STOP?..................... 3
:LIST:STARt:STEP?..................... 3
:LIST:CENTerspan?..................... 3
:LIST:INTerval?....................... 3
:MEASure?............................. *2
:MEASure:RDC?......................... *2
:MEASure:COMParator:PEAK:LMAX? ....... 3
:MEASure:COMParator:PEAK:LMIN? ....... 3
:MEASure:CURSor? ..................... 3
:MEASure:POINt?....................... 3
:MEASure:ANALysis:COMParator? ....... 6
:MEASure:ANALysis:DELTa? ............. 5
:MEASure:ANALysis:PEAK?............... 2
:MEASure:ANALysis:SIMulation?......... *2
:MEASure:CONTinuous:PEAK? ............ *2
:MEASure:ITEM?........................ 2
:MEMory?.............................. *2
:MONItor? .......................... 2
:SYSTem:DATE?......................... 3
:SYSTem:TIME?......................... 3
:SEGMent:STARt:STOP?.................. 3
:SEGMent:INTerval? ..................... 3
:SEARch? .............................. *3
*1: Differs depending on the argument.
*2: Differs depending on the setting.
*3: Differs depending on the results.
• All queries producing responses when syntax checking
is performed will produce responses when syntax
checking is performed.
• Whether any queries produce responses when read:
• There are no queries which produce response
messages at the instant they are read in by the
controller.
• Whether any commands are coupled:
There are no relevant commands.
6
Explanation of functional elements used when
constructing device specific commands,
and whether compound commands or program
headers can be used
The following are used.
• Program message
• Program message terminator
• Program message unit
• Program message unit separator
• Command message unit
• Query message unit/Command program header
• Query program header
• Program data
• Character program data
• Decimal program data
• Compound commands program headers
7
Explanation of buffer capacity limitations for block
data
Block data is not used.
8
List of program data elements used in
<expressions>, and degree of maximum nesting
level allowed in sub-expressions
(including syntax restrictions imposed on
<expressions> by the device).
Sub-expressions are not used. Character data and
decimal data are the only program data elements used.
9 Response syntax for queries See included LCR Application Disk.
10
Transmission congestion related to device-to-
device messages that do not conform to the
general principles
for basic response messages
There are no device to device messages.
10
9
8
7
6
5
4
3
2
1
Appx.
Ind.