Hioki IM7580, Инструкция по эксплуатации

Страница: 130 / 340

122
Judging Measurement Results (Comparator Function)
9
10
Changing the unit: M (mega)/ k (kilo)
9
Press the cell for LEFT/RIGHT of user-defined
conditions.
10
Use the numeric keypad to set the left and right
limit values.
The range that can be set varies depending on the
sweep parameter.
Refer to the following for each of the parameters.
• See “4.4.1 Setting Measurement Signal Frequency”
(p. 88) for frequency.
• See “4.4.2 Setting the Measurement Signal Level” (p. 89)
for POWER/V/I.
If the setting is such that right limit value < the left
limit value, they are automatically switched, set, and
displayed.
[OFF] Value is not set.
[C] Repeats the input.
[CANCEL] Cancels the setting.
11
12
13
11
Press the cell for HI/LO corresponding to user-
defined conditions.
12
Use the numeric keypad to set the left and right
limit values.
Settable range -9.99999 G to 9.99999 G
If the setting is such that upper limit value < the
lower limit value, they are automatically switched,
set, and displayed.
[-] Inputs the unit with a minus (-) sign.
[×10
3
] Increases the prefix of the unit.
[/10
3
] Decreases the prefix of the unit.
[OFF]
Value is not set.
[C] Repeats the input.
[CANCEL] Cancels the setting.
13
Press [EXIT] to close the judgment settings
screen.
14
Press [EXIT] to close the advanced settings
screen.